Moisture and humidity causes

　　These can be best dealt with, with a hacksaw. Remember, that if you end up running into an issue which is beyond your skill level, to consult a professional. If you happen to make a mistake, you should band saw machine manufacturers have a few extras on hand as most shingles are sold in bundles. In order to ensure a task is completed without injury, several safety precautions should be taken into consideration.Step 3 – Trim and Measure the ReplacementCut out a replacement shingle so that it appears slightly smaller than the space it's about to fill (roughly 3/8 narrower).

　　– Adjust into placePlace a wood block at the end of the new piece where it sticks out. Hit the block several times until it is properly aligned. Choose a dry, warm day to do your roofing. This will help you avoid leaks while maintaining the longevity of the roof as a while.Step 5 – ReplacementPlace the new one in the vacant spot, allowing roughly ¼ inch to hang down past the surrounding shingles. In this way, you will be able to remove the old nails that held the damaged one in place. Also make sure any smaller fragments of the previous shingles are extracted. Push the shingle above the replacement back down into the correct position.Hopefully, you now have a better idea of who to fix a wood shingle.When you notice that a wood shingle on your roof has become cracked or damaged, the best option is the replace it immediately.

　　Moisture and humidity causes shingles to expand over time, and the space will help avoid cracking of the replacement. Thankfully, the process is a simple one, which takes only a small amount of time and effort.Tools/MaterialsHammerPry barChiselExtension ladderReplacement shinglesHacksawWood BlockRoofing CementRoofing NailsStep 1 – Safety Comes FirstRoofing can be dangerous work.Step 2 – Shingle RemovalUsing your hammer and chisel, crack the damaged bit and remove it in chunks. Always have someone close by to secure the ladder as you climb up and down. This will act as a buffer between the shingle and the hammer. . Drive two nails into the top at a 45 degree angle. Avoid walking on a wooden roof, especially when it is raining.Step 4 – Make RoomBecause shingles overlap, try using a pry bar to lift it directly above the one that has been removed

This is because of the engineered...